|
||||||||||||||||||||||||||||||||
|
|
Models | Double-acting Single-rod/Standard | ||
Cylinder Bore | 40,50,63,80,100,125,140,160 | ||
Mounting Style | SD,LA,FA,FB,CA,CB,TA,TC | ||
Rod Type | B Rod | ||
Norminal Pressure | 21MPa | ||
Max. Working Pressure | Rod Side:26.5MPa Head Side:24.5MPa | ||
Proof Test Pressure | 31.5MPa | ||
Min. Operating Pressure | Rod Side: less than 0.45MPa Head Side: less than 0.3MPa | ||
Operating Speed Range | 8 to 300mm/s(Not including Cushion) | ||
Operating Temperature | -10 to +80 Celsius Degree (But do not use when frozen) | ||
Cushion Mechanism | Metal fitting system | ||
Working Fluid | Petroleum-based fluid (For other working oil, refer to the table of working oil adaptability.) |
||
Thread Tolerance | JIS 6g/6H | ||
Standard Stroke | |||
Stroke Tolerance | |||
Accessories | Boots | Standard : Nylon tarpaulin Semi-standard : Chloropaulin/Conex | |
Rod End Attachment | Rod End Eye(T type)/Rod End Clevis(Y type) | ||
Others | Lock Nut |
|
|
Seal Material | Allowable Fluid | ||||
Petroleum-based Fluid |
Water-Glycol Fluid |
Phosphate-Ester Fluid |
Water in Oil Fluid |
Oil in Water Fluid |
|
1:Nitrile rubber | |||||
2:Urethan rubber | |||||
3:Fluoric rubber | |||||
6:HNBR |
Note1) |
The marked items are applicable, while marked items are inapplicable. Please contact to us when you use marked items. |
Note2) | The marked items are the recommended packing materials in case of the first priority to abrasion resistance. |